Mechanical Inspector
Lockheed Martin
Job ID: 702087BR Date posted: Aug. 21, 2025
Description:- Perform any Final Assembly inspection operations (Assembly Operation Sheets) including aircraft Final Assembly "shakes", on completed aircraft.
Typical Responsibilities
-Follow standard inspection procedures, drawings, and specifications; check sheets and other written or oral instructions to perform any final assembly inspection requirements.
-Inspect completed aircraft for satisfactory completion of all flight controls for clearances, operation and safety, hydraulic systems for operational acceptability. Power plant, rotor head and transmission assemblies (QCA) for correct installation; physical installation of electrical and electronic components for operation per Acceptance and Test Procedures.
-Check for completeness in detail of all other related systems and components requiring final check out.
-Maintain current record of deviations (discrepancies), and document non conforming product due to workmanship or defective materials in accordance with current Non Conforming Material Rejection Procedures.
-Inspect assemblies and installations not previously completed (carry forward) due to parts shortages, Engineering design changes or rework.
-Perform similar Final Assembly inspections on: derivative aircraft.
-Verify latest drawing revisions are incorporated into assemblies and installations and interface as required with Engineering and other departments as necessary on problems related to drawings, operation sheets, etc.
-Direct and instruct 1 to 2 lower grade inspectors as required.
-Maintain Certifications for Torque, Flight Safety Parts, and. Portable Penetrant Inspections.
-Utilize Electronic Operation Sheet System (Solumina) for accountability of all assembly operations and test requirements.
-Utilize electronic Non Conforming Material Rejection Report System for parts rejection.
-Perform detail specification checks and other related inspection duties as directed
-Refer questionable conditions or recurring difficulties to working leader or supervision.
- As required segregate waste material and comply with all EH&S practices.
Basic Qualifications:
Requires a well-rounded knowledge of aircraft inspection procedures, manufacturing operations, and assembly and installation procedures. Also requires
ability to read and interpret complicated drawings, use precision measuring instruments, follow engineering orders and instructions, and interpret military and
commercial specifications according to inspection practices.
- High School Diploma
-2 to 3 years trades training or A&P (Airframe and Powerplant) license or equivalent
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.
As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level: Hourly/Non-Exempt
Business Unit: RMS
Relocation Available: No
Career Area: Craft Workers
Type: Full-Time
Shift: Multiple shifts available
Description:- Perform any Final Assembly inspection operations (Assembly Operation Sheets) including aircraft Final Assembly "shakes", on completed aircraft.
Typical Responsibilities
-Follow standard inspection procedures, drawings, and specifications; check sheets and other written or oral instructions to perform any final assembly inspection requirements.
-Inspect completed aircraft for satisfactory completion of all flight controls for clearances, operation and safety, hydraulic systems for operational acceptability. Power plant, rotor head and transmission assemblies (QCA) for correct installation; physical installation of electrical and electronic components for operation per Acceptance and Test Procedures.
-Check for completeness in detail of all other related systems and components requiring final check out.
-Maintain current record of deviations (discrepancies), and document non conforming product due to workmanship or defective materials in accordance with current Non Conforming Material Rejection Procedures.
-Inspect assemblies and installations not previously completed (carry forward) due to parts shortages, Engineering design changes or rework.
-Perform similar Final Assembly inspections on: derivative aircraft.
-Verify latest drawing revisions are incorporated into assemblies and installations and interface as required with Engineering and other departments as necessary on problems related to drawings, operation sheets, etc.
-Direct and instruct 1 to 2 lower grade inspectors as required.
-Maintain Certifications for Torque, Flight Safety Parts, and. Portable Penetrant Inspections.
-Utilize Electronic Operation Sheet System (Solumina) for accountability of all assembly operations and test requirements.
-Utilize electronic Non Conforming Material Rejection Report System for parts rejection.
-Perform detail specification checks and other related inspection duties as directed
-Refer questionable conditions or recurring difficulties to working leader or supervision.
- As required segregate waste material and comply with all EH&S practices.
Basic Qualifications:
Requires a well-rounded knowledge of aircraft inspection procedures, manufacturing operations, and assembly and installation procedures. Also requires
ability to read and interpret complicated drawings, use precision measuring instruments, follow engineering orders and instructions, and interpret military and
commercial specifications according to inspection practices.
- High School Diploma
-2 to 3 years trades training or A&P (Airframe and Powerplant) license or equivalent
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.
As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level: Hourly/Non-Exempt
Business Unit: RMS
Relocation Available: No
Career Area: Craft Workers
Type: Full-Time
Shift: Multiple shifts available
Por favor confirme su dirección de correo electrónico: Send Email